11 Favorite Easter Crafts From Pinterest

Bunny Ears Headband Pinned by Chelsey Hawkins

Kids will be “hoppy” to have these fun ears. Even if your kid (or you) have minimal sewing skills, you can still pull these together really quickly.

Supplies:

Child-size headband

11⁄2 yards of 1⁄2-inch-wide double- fold bias tape.

Directions

1. Cut an 181⁄2- inch-long piece of bias tape. Hem the cut ends under 1⁄2 inch on each side, then stitch together the long side to form a casing. Fold the casing in half so that the ends touch and use a straight pin to mark the fold’s center.

2. Feed an extra-thick, 12-inch-long pipe cleaner through one end of the casing, stopping at the pin. Feed a second pipe cleaner through the casing’s other end until it, tooeets the pin; remove pin. Bring the casing’s open ends toward each other and twist the exposed pipe cleaners together to form a rabbit ear shape. Repeat steps one and two to make a second ear.

3. Cut a piece of bias tape the length of the headband, plus one extra inch. Wrap the tape over the headband, then use pins to mark the two spots where you want to attach the ears (use the photo at left for guidance).

4. Remove the tape from the headband and stitch the long side together, from the pins out to both ends of the tape; stitch these ends closed, and remove pins. Twist the ears’ pipe-cleaner ends around the headband in the desired spots, then slide each end of the headband into the casing. Use a needle and thread to slip-stitch the tape around and between the ears closed.